Konica Minolta C10 manual Thick Stock

„Wet (or damp)

" Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet media.

„Layered

„Adhesive

„Folded, creased, curled, embossed, warped, or wrinkled

„Perforated, three-hole punched, or torn

„Too slick, too coarse, or too textured

„Different in texture (roughness) on the front and back

„Too thin or too thick

„Stuck together with static electricity

„Composed of foil or gilt; too luminous

„Heat sensitive or cannot withstand the fusing temperature (180°C [356°F])

„Irregularly shaped (not rectangular or not cut at right angles)

„Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

„Acidic

„Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift.

You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time.

Capacity	Tray 1	Up to 50 sheets, depending on their thick-
		ness
	Tray 2	Not supported
Driver	Thick Stock
Media Type
Weight	91 to 163 g/m² (25 to 43 lb bond)
Duplexing	Not supported

" 43 lb bond is also referred to as 90 lb index stock.

42 Print Media