Manuals / Konica Minolta / Computer Equipment / Scanner

Konica Minolta II manual Connecting To The Computer

Models: II

1 39

Download 39 pages 26.84 Kb

Page 12

Manual background

CONNECTING TO THE COMPUTER

4.Plug the power cord into the scanner’s AC socket.

5.Plug the other end of the power cord into a grounded outlet.

10

Image 12

Konica Minolta II manual Connecting To The Computer

Contents

Hardware Manual This manual does not instruct in the basic use of personal computersuse of Window 95, Windows NT, or Mac OS Tested by the Minolta CorporationFOR PROPER AND SAFE USE TABLE OF CONTENTS INDICATOR LAMP CUSTOMER SERVICETECHNICAL DETAILS MinoltaPACKAGE CONTENTS BEFORE YOU BEGINSYSTEM REQUIREMENTS MACINTOSHMACINTOSH NAMES OF PARTS FRONTUSING THE SCANNER FOR THE FIRST TIME BACKIMPORTANT: LOCKING PIN INFORMATION UNLOCK THE OPTICS BEFORESETTING THE SCSI ID TO CHANGE THE SCSI IDCONNECTING TO THE COMPUTER BEFORE CHANGING SCSI IDS, CONNECTING SCSICABLES, OR DISCONNECTING SCSI CABLES TURN OFF THE COMPUTER AND ALL THE SCSI DEVICESCONNECTING TO THE COMPUTER IF THE SCANNER IS INSIDE THE CHAIN… BEFORE CHANGING SCSI IDS, CONNECTING SCSICABLES, OR DISCONNECTING SCSI CABLES TURN OFF THE COMPUTER AND ALL THE SCSI DEVICESCONNECTING TO THE COMPUTER total GETTING STARTED FILM EMULSIONHANDLING CARE LOADING 35MM FILM HOLDERS SLIDE MOUNT HOLDER SH-M135MM FILM HOLDER FH-M1 4.Press the cover firmly closed until it clicks USING THE MEDIUM FORMAT HOLDER MH-M1 LOADING THE MEDIUM FORMAT HOLDER MH-M1MEDIUM FORMAT AND TEM FILM 3.Place the film in the film holder 4.Press the cover firmly closed until it clicks16mm AND APS SLEEVE FILM 5.Press the cover firmly closed until it clicks ROTATING THE FRAME 2. Rotate the carrier as desired3. Turn the holding screw clockwise to secure it INSERTING THE HOLDER INTO THE SCANNER EJECTINGAPS ADAPTER AD-100SOLD SEPARATELY APS ADAPTER – NAMES OF PARTSDo not touch LOADING THE CASSETTE 1.Slide the film-chamberrelease as shown3.Close the film-chamberdoor INSERTING THE ADAPTER EJECTING THE ADAPTER 2. Remove the adapterCHANGING THE FLUORESCENT LAMP 4.Connect the new lamp IMPORTANT BEFORE TRANSPORTING THE SCANNER TROUBLESHOOTING SymptomCause/Action ReferenceTROUBLESHOOTING SymptomThe indicator lamp is red and blinks rapidly Cause/ActionINDICATOR LAMP Indicator LampScanner Status TECHNICAL DETAILS CUSTOMER SERVICE AMinolta Austria Ges.m.b.H