Manuals / Konica Minolta / Computer Equipment / Scanner

Konica Minolta II manual Before You Begin, Package Contents

Models: II

1 39

Download 39 pages 26.84 Kb

Page 6

BEFORE YOU BEGIN

BEFORE YOU BEGIN

PACKAGE CONTENTS

CHECK THIS PACKING LIST BEFORE YOU BEGIN. IF SOME PARTS ARE MISSING, CONTACT YOUR DEALER OR A MINOLTA SERVICE FACILITY.

•Minolta Dimâge Scan Multi II scanner

•35mm Film Holder FH-M1

•35mm Slide Mount Holder SH-M1

•Medium Format Film Holder MH-M1

•Film Masks:

6 x 4.5 Medium Format Film Mask

6 x 6 Medium Format Film Mask

6 x 7 Medium Format Film Mask

6 x 8 Medium Format Film Mask

6 x 9 Medium Format Film Mask

APS Sleeve Film Mask

16mm Film Mask

•Power Cord PW-M2

•SCSI Cable SC-11

•Dimâge Scan Multi II CD-ROM v1.0

•Instruction Manuals (1 software, 1 hardware)

•Warranty and Software Registration card

4

Image 6

Konica Minolta II manual Before You Begin, Package Contents

Contents

Hardware Manual use of Window 95, Windows NT, or Mac OS This manual does not instruct in thebasic use of personal computers Tested by the Minolta CorporationFOR PROPER AND SAFE USE TABLE OF CONTENTS TECHNICAL DETAILS INDICATOR LAMPCUSTOMER SERVICE MinoltaPACKAGE CONTENTS BEFORE YOU BEGINSYSTEM REQUIREMENTS MACINTOSHMACINTOSH NAMES OF PARTS FRONTIMPORTANT: LOCKING PIN INFORMATION USING THE SCANNER FOR THE FIRST TIMEBACK UNLOCK THE OPTICS BEFORESETTING THE SCSI ID TO CHANGE THE SCSI IDCABLES, OR DISCONNECTING SCSI CABLES CONNECTING TO THE COMPUTERBEFORE CHANGING SCSI IDS, CONNECTING SCSI TURN OFF THE COMPUTER AND ALL THE SCSI DEVICESCONNECTING TO THE COMPUTER CABLES, OR DISCONNECTING SCSI CABLES IF THE SCANNER IS INSIDE THE CHAIN…BEFORE CHANGING SCSI IDS, CONNECTING SCSI TURN OFF THE COMPUTER AND ALL THE SCSI DEVICESCONNECTING TO THE COMPUTER total GETTING STARTED FILM EMULSIONHANDLING CARE LOADING 35MM FILM HOLDERS SLIDE MOUNT HOLDER SH-M135MM FILM HOLDER FH-M1 4.Press the cover firmly closed until it clicks USING THE MEDIUM FORMAT HOLDER MH-M1 LOADING THE MEDIUM FORMAT HOLDER MH-M1MEDIUM FORMAT AND TEM FILM 3.Place the film in the film holder 4.Press the cover firmly closed until it clicks16mm AND APS SLEEVE FILM 5.Press the cover firmly closed until it clicks ROTATING THE FRAME 2. Rotate the carrier as desired3. Turn the holding screw clockwise to secure it INSERTING THE HOLDER INTO THE SCANNER EJECTINGAPS ADAPTER AD-100SOLD SEPARATELY APS ADAPTER – NAMES OF PARTSDo not touch LOADING THE CASSETTE 1.Slide the film-chamberrelease as shown3.Close the film-chamberdoor INSERTING THE ADAPTER EJECTING THE ADAPTER 2. Remove the adapterCHANGING THE FLUORESCENT LAMP 4.Connect the new lamp IMPORTANT BEFORE TRANSPORTING THE SCANNER Cause/Action TROUBLESHOOTINGSymptom ReferenceThe indicator lamp is red and blinks rapidly TROUBLESHOOTINGSymptom Cause/ActionINDICATOR LAMP Indicator LampScanner Status TECHNICAL DETAILS CUSTOMER SERVICE AMinolta Austria Ges.m.b.H