LOADING 35MM FILM HOLDERS

SLIDE MOUNT HOLDER SH-M1

The slide mount holder can hold up to 4 mounted slides (35mm or APS).

Slide mounts must be thicker than 1mm and thinner than 2mm to fit properly into the holder.

Results of scanning glass-mounted slides can be unpredictable.

Blow dust off the slide before placing it into the film holder.

1.Position the slide mount holder so the white arrow is

on the top-left side, then open the slide mount.

• Open the slide holder by pushing up on the two tabs from underneath.

2. Place the slides within the indentations, making sure they lie flat.

• Insert the slides emulsion side down.

3. Press the cover firmly closed until it clicks.

15

Page 17
Image 17
Konica Minolta II manual Loading 35MM Film Holders, Slide Mount Holder SH-M1