INDICATOR LAMP
The indicator lamp on the front of the scanner reveals the status of the scanner.
Indicator Lamp | Scanner Status |
|
|
Off | Set up is complete and there is no holder |
| inserted in the scanner. |
|
|
Green – blinking slowly | Scanner is busy: |
| • setting up (initializing). |
| • index scanning, prescanning, or scanning. |
| • autofocus, point AF, manual focus. |
|
|
Green – blinking quickly | If using a film holder, the scanner is busy: |
| • loading the film holder. |
| • transporting the film holder. |
| • ejecting the film holder. |
| If using the APS Adapter, the scanner is busy: |
| • rewinding the film in the APS adapter. |
| • transporting the adapter. |
|
|
Green – glows steadily | There is a film holder in the scanner. The |
| scanner is not busy. |
|
|
Red – glows steadily | There is a problem with the accessory panel. |
| If using a film holder: |
| The accessory panel is open. Close the |
| accessory panel. |
| If using the APS adapter: |
| The accessory panel is not fully open. |
| Open it all the way and push it until it clicks. |
|
|
Red – blinks quickly | The fluorescent lamp unit cover is not fully |
| closed. |
| or |
| The fluorescent lamp is burnt out. |
| or |
| There is a hardware malfunction. Contact a |
| Minolta Service facility. |
|
|
33
