Manuals / Konica Minolta / Computer Equipment / Scanner

Konica Minolta II manual total

Models: II

1 39

Download 39 pages 26.84 Kb

Page 15

total

7. Plug the other end of the power cord into a grounded outlet.

	The	total			length		of
		total			length		chain
			in a SCSI
	cable
								6m
				not		exceed		6m
	should					exceed
						most

	(20	ft.) for
		ft.) for
					.
					.
	systems

13

Image 15

Konica Minolta II manual total

Contents

Hardware Manual Tested by the Minolta Corporation This manual does not instruct in thebasic use of personal computers use of Window 95, Windows NT, or Mac OSFOR PROPER AND SAFE USE TABLE OF CONTENTS Minolta INDICATOR LAMPCUSTOMER SERVICE TECHNICAL DETAILSBEFORE YOU BEGIN PACKAGE CONTENTSSYSTEM REQUIREMENTS MACINTOSHMACINTOSH FRONT NAMES OF PARTSUNLOCK THE OPTICS BEFORE USING THE SCANNER FOR THE FIRST TIMEBACK IMPORTANT: LOCKING PIN INFORMATIONTO CHANGE THE SCSI ID SETTING THE SCSI IDTURN OFF THE COMPUTER AND ALL THE SCSI DEVICES CONNECTING TO THE COMPUTERBEFORE CHANGING SCSI IDS, CONNECTING SCSI CABLES, OR DISCONNECTING SCSI CABLESCONNECTING TO THE COMPUTER TURN OFF THE COMPUTER AND ALL THE SCSI DEVICES IF THE SCANNER IS INSIDE THE CHAIN…BEFORE CHANGING SCSI IDS, CONNECTING SCSI CABLES, OR DISCONNECTING SCSI CABLESCONNECTING TO THE COMPUTER total GETTING STARTED FILM EMULSIONHANDLING CARE SLIDE MOUNT HOLDER SH-M1 LOADING 35MM FILM HOLDERS35MM FILM HOLDER FH-M1 4.Press the cover firmly closed until it clicks USING THE MEDIUM FORMAT HOLDER MH-M1 LOADING THE MEDIUM FORMAT HOLDER MH-M1MEDIUM FORMAT AND TEM FILM 4.Press the cover firmly closed until it clicks 3.Place the film in the film holder16mm AND APS SLEEVE FILM 5.Press the cover firmly closed until it clicks ROTATING THE FRAME 2. Rotate the carrier as desired3. Turn the holding screw clockwise to secure it EJECTING INSERTING THE HOLDER INTO THE SCANNERAPS ADAPTER AD-100SOLD SEPARATELY APS ADAPTER – NAMES OF PARTSDo not touch LOADING THE CASSETTE 1.Slide the film-chamberrelease as shown3.Close the film-chamberdoor INSERTING THE ADAPTER 2. Remove the adapter EJECTING THE ADAPTERCHANGING THE FLUORESCENT LAMP 4.Connect the new lamp IMPORTANT BEFORE TRANSPORTING THE SCANNER Reference TROUBLESHOOTINGSymptom Cause/ActionCause/Action TROUBLESHOOTINGSymptom The indicator lamp is red and blinks rapidlyINDICATOR LAMP Indicator LampScanner Status TECHNICAL DETAILS CUSTOMER SERVICE AMinolta Austria Ges.m.b.H