Konica Minolta II manual Plug the other end of Scsi cable a into Scsi device

IF THE SCANNER IS INSIDE THE CHAIN…

TURN OFF THE COMPUTER AND ALL THE SCSI DEVICES

BEFORE CHANGING SCSI IDS, CONNECTING SCSI

CABLES, OR DISCONNECTING SCSI CABLES.

One D-sub-25 to Centronics 50 cable is included with your scanner. Please see your dealer if you require additional cables.

The following is an example of one possible SCSI chain configuration.

Computer
SCSI Device 1	SCSI Device 2
	Scanner
Cable “A”	Cable “B”

1.Connect one end of the SCSI cable A into either SCSI port on the back of the scanner.

• Either SCSI port can be used, there is no dedicated in or out port.

2.Plug the other end of SCSI cable A into SCSI device 1.

11 Continued on following page.