5. SYNTH FILTER

These parameters modify the tonal character of the synth part. : supports motion sequence.

CUTOFF : Adjusts the cutoff frequency of the fil- ter.

EG INT (EG intensity) : Adjusts the depth of the filter envelope.

RESONANCE : Adjusts the resonance of the fil- ter.

DRIVE : Adjusts the amount of distortion being introduced by overdriving the filter.

TYPE (filter type) : Selects the type of filter.

These parameters have no effect on drum parts.

Part select section

1

2

3

4

1.

(DRUM PART) 1...5, 6A-6B, 7A-7B (drum part keys)

3.

(SYNTH PART) 1...5 (synth part keys)

 

These keys select drum parts. By pressing these

 

These keys select synth parts.

 

keys you can hear the sound that is assigned to

4.

(SYNTH PART) ACCENT (synth accent part key)

 

each part.

 

 

This key selects the synth accent part.

 

 

 

2.

(DRUM PART) ACCENT (drum accent part key)

 

 

This key selects the drum accent part.

Step key section

1

2

3

4

5

6

1. SHIFT key

This key is used in conjunction with other keys. Hold down this key and press another key to access the secondary function of that key.

SHIFT+RESET key: Erase data from a pattern.

SHIFT+step key: Execute the function printed below the step key.

SHIFT+dial: Make larger or finer changes in the value. (This will depend on the selected part.)

SHIFT+PATTERN key: Compare patterns.

For details on using the shift key with other keys, refer to the explanation of each parameter.

2. PATTERN SET key

3. KEYBOARD key

When this key is on (lit), you can use the sixteen step keys as a keyboard to play a synth part (☞ p.22: Keyboard function). This key will alternate on/off each time it is pressed.

4. [ ][ ] (select keys)

These keys are used to control the current position in the lower row (red) of select LEDs. These LEDs indicate different information - pattern set group, keyboard octave, step key position - in conjunction with other keys. (☞ p.13: Select LEDs)

In Song mode, you can use these keys as fast-forward / rewind keys.

12

By holding down this key and pressing the STEP key, you can switch to the pattern that was registered for that step key (☞ p.60: Pattern Set).