5.Make settings on your external MIDI device (mas- ter) so that it will transmit MIDI clock messages.
6.Return to Pattern mode or Song mode.
7.When you start the sequencer of your external MIDI device, the
If MIDI clock messages are being received at the MIDI IN connector, you can press the
If the
If the
Playing back in sync with other Electribe models
You can enjoy even greater possibilities by playing the EMX- 1 in sync with other models in the Electribe series such as the
To make the
Use a MIDI cable to connect the
1.Press the MIDI key (it will light).
2.Press the [] cursor key to change the display to read “Clock.”
3.Turn the dial of each device to set the
4.Press the
If the MIDI channel of one of the
To make the
1.Press the MIDI key (it will light).
2.Press the [] key to change the display to read “Clock.”
3.Set the
4.Set the
For example, set both to “01”.
5.Set the
About the MIDI messages used for synchronization
The MIDI messages used for synchronization (Realtime Messages) are Timing Clock [F8], Start [FA], Continue [FB], and Stop [FC].
Only one master device (e.g., sequencer) in the connected system can transmit these messages; the remaining slaved devices (sequencers) will receive these messages.
Timing Clock
The slave device calculates its own tempo according to the Timing Clock messages it receives from the master device.
If you set the
Start
The Start message tells the slave device when to begin playing. A Start message is transmitted when you press the PLAY/PAUSE key. When a slave device receives the Start message, it will begin playing from the beginning in synchronization with the incoming Timing Clock messages.
Continue, Stop
If you press the START/PAUSE key on the master device while it is paused, the master device will transmit a Continue message. When a slave device receives the Continue message, it will resume playback from the location at which it is currently stopped. If you press the STOP key during play- back, the master will transmit a Stop message. When a slave device receives the Stop message, it will stop playback.
84