5.The parameter display will indicate “Load” and the value display will indicate “All” Press key 13.
6.Select the file that you want to load. The value dis- play will indicate “LdFile,” and the parameter dis- play will show “(six characters of the filename).” Turn the dial to select the desired file, and press key 13.
7.The parameter display will ask “Sure?” and the value display will read “No.” Turn the dial to change this to “Yes,” and press key 13 to execute the Load operation. While the data is being loaded, the step keys will indicate the state of progress.
When loading is completed, the
If you decide to cancel, press the STOP/CANCEL key.
With the factory settings, memory protect is turned on, so you will not be able to execute this opera- tion. Turn memory protect off before you execute the Load operation (☞ p.76 “Saving your Global mode settings”).
Loading a single pattern from SmartMedia (Load Pattern)
1.Insert the SmartMedia card into the SmartMedia slot.
2.Press the GLOBAL key. (It will light.)
3.Hold down the Shift key and press step key 13 (CARD) (key 13 will blink). The parameter display will indicate “CardMenu.”
4.The value display will indicate “Load.” Press key 13.
5.The parameter display will indicate “Load” and the value display will indicate “All.” Turn the dial to select “1Ptrn” and then press key 13.
6.Select the file (the filename you specified for Save All) that contains the pattern you want to load. The value display will indicate “LdFile” and the param- eter display will show “(six characters of the filename).” Turn the dial to select the desired file, and then press key 13.
7.Select the pattern that you want to load. The pa- rameter display will indicate “Load” and the value display will show the “(pattern number)” (you can hold down the shift key to display the pattern name instead). Turn the dial to select the desired pattern, and press key 13 to load it.
When loading is completed, you will return to Pattern mode (key 13 will go dark, and the PATTERN key will light).
If you decide to cancel, press the STOP/CANCEL key.
Be aware that this procedure does not save (write) the pattern into internal memory.
With the factory settings, memory protect is turned on, so you will not be able to save data. Turn memory protect off before you execute the Write operation (☞ p.76 “Saving your Global mode set- tings”).
Deleting an EMX-1 file from SmartMedia (Delete File)
Here’s how a user file containing
Once a file has been deleted, it cannot be read again.
1.Insert the SmartMedia card into the SmartMedia slot.
2.Press the GLOBAL key. (It will light.)
3.Hold down the Shift key and press step key 13 (CARD) (key 13 will blink). The parameter display will indicate “CardMenu.”
4.The value display will indicate “Load.” Turn the dial to select “Delete” and then press key 13.
5.Select the user file that you want to delete. The value display will indicate “DelDMX” and the pa- rameter display will show “(six characters of the filename).” Turn the dial to select the file, and then press key 13.
6.The parameter display will ask “Sure?” and the value display will read “No.” Turn the dial to change this to “Yes” and press key 13 to execute the Delete operation. While the file is being deleted, the step keys will indicate the state of progress.
Only
78