Using the “ 
” (green) setting on the position dial
(In the “ 
” (green) position on the position dial, the same combination of photogra- phy modes (focusing, exposure, metering, drive) are selected when the main switch is set to ON.)
Position
dial
Display panel
Viewfinder
Set the main switch to “ON”, and turn the position dial to “ 
”
(green).
The camera is set to the following modes when shipped from the factory.
Focusing mode : 
Exposure mode :
Metering mode | : |
Drive mode | : |
•The mode details appear on the display panel. If the display differs from the mode
details shown above, reset in accordance with <Changing details for “ 
” (green)
position> on the next page.
Push the focusing frame select lever to select the central portion.
The selected position appears on the display panel. The selected focus frame flashes red once in the viewfinder.
Point the focus frame in the cen- ter of the viewfinder towards the
subject and half-press the shutter button.
When the subject is focused the focus frame at the center of the viewfinder flashes red once, a beep is heard, and the “ 
” mark indicat- ing focusing is lit in the viewfinder.
Press the shutter button to take the photograph.
<Changing details for “ 
Position
dial
Display panel
F dial
” (green) position>
The mode details for “ 
” (green) on the position dial are changed as described below. Create your own mode details as required for your unique type of photography.
Set the main switch to “ON”, and set the position dial to “SET”.
The mode details appear on the display panel, and the current focusing mode details flash.
Set the F dial to the desired focusing mode. The selected
focusing mode flashes.
Set the R dial to the desired expo- sure mode. The selected expo-
sure mode appears on the display panel. Set the F dial to the desired exposure mode. The selected expo- sure mode details flash on the dis- play panel.
Set the R dial to the desired metering mode and drive mode details in the same way. The desired mode details flash on the F dial.
Set the position dial to “ 
”. The mode details are now changed.
Focus indicators
R dial
36 | 37 |
