Kyocera NX instruction manual Display panel illumination

Models: NX

1 61
Download 61 pages 41.82 Kb
Page 8
Image 8

The display in the viewfinder incorporates a variety of information - as well as the focus, aperture, and shutter speed, it also shows the exposure meter and exposure counter.

The viewfinder display turns on when the operations below are performed, then automatically turns off after 16 seconds to save power.

When the main switch is turned on.

When the shutter button is half-pressed while the main switch is turned on. If any dial is changed while the viewfinder display is switched over while the viewfinder display is lit, the display time is extended another 16 seconds.

” Display time may be changed. (Power hold time, page 87).

The viewfinder display turns off in the following cases:

Photography, Film finished, Rewinding, Rewinding finished, Film advance failure, Battery discharged

<Display panel illumination>

“LIGHT” button

The display panel has an illumination function. Press the “LIGHT” button once to light the display panel, and press it again to extinguish it. The panel is cleared automatically after 16 seconds.

If other dials or buttons are operated while the display panel is lit, the duration of illumi- nation is automatically extended. The dis- play panel light turns off as soon as the shutter is released.

” Illumination time may be changed. (Power hold time, page 87)

12

Page 8
Image 8
Kyocera NX instruction manual Display panel illumination