Kyocera NX instruction manual Main specifications

Main specifications

Type:	35mm focal plane type AF/AE single lens reflex camera
Picture size:	24 x 36mm
Lens mount:	Contax N mount
Shutter type:	Vertical travel focal plane shutter
Shutter speed:	Av, Tv and P: 32~1/4000 sec.
	M: 32~1/4000 sec. and bulb
	X: 1/125 sec. (M mode)

Sync contact:	X contact (synchronized at up to 1/125 sec.)
	Direct contact and synchronization terminal included
Selftimer:	Electronic type, 10 sec. delay
Shutter release:	Electronic release, with dedicated cable switch socket
Exposure control:	Aperture priority auto	Shutter priority auto	Program auto
	Manual exposure	TTL auto flash

Metering system: TTL evaluative metering, center-weighted average metering, or center

divided partial metering selectable
Metering range (ISO 100, F1.4):
Evaluative metering	: EV 0~21
Center-weighted average metering	: EV 0~20
Center divided partial metering	: EV 3~20

Film speed range: Automatic setting with DX code ISO 25~5000

	Manual setting	ISO 6~6400
AE lock:	Image surface value memory
Exposure compensation:

+3EV~-3EV (in steps of 1/3 or 1/2)

ABC mechanism: Exposure compensation with ABC button and F dial setting Compensation range ±1/3EV/±1/2EV/±1EV

Internal flash: Guide number 13.5 (ISO 100), angle of illumination up to a focal length of 28mm, red-eye reduction flash

Automatic flash intensity adjustment:

TTL direct metering

Flash synchronization:

Automatic selection of shutter speed when flash charged

Flash auto setting function:

Possible by combination with Contax flash unit with flash auto setting function

Second curtain synchronization:

Possible with internal flash or Contax flash unit with second curtain synchronization function

Autofocus: 5-point TTL phase difference detection

Viewfinder: Pentaprism eye-level (long-eye point)

•Field of view 93% • Magnification 0.78x

(with 50mm standard lens at infinity, -1D diopter) Diopter correction: Eight different FL type lenses are available Focusing screen: Fixed, full matte

Viewfinder display:

Focus frame, exposure counter/selftimer time/ABC shooting order/film loading, flash mark, compensation mark, focus display, aperture value, shutter speed, metering mark, exposure meter, exposure compensation mark, manual exposure mark

Display panel: Exposure counter/selftimer time/ABC shooting order/bulb elapsed time/film loading, battery mark, distance display, focus mode (manual focus, single autofocus, continuous autofocus), exposure mode (manu- al exposure, aperture priority auto, shutter priority auto, program auto), metering display (center divided partial metering, center-weighted aver- age metering, evaluative metering), drive mode (selftimer photography, single-frame photography, continuous photography), DX/ISO mark, ABC compensation mark, internal flash intensity compensation mark, aper- ture value/ABC compensation/internal flash intensity compensation, shutter speed/film speed/custom functions, exposure compensation, CF mark

Film loading: Auto loading with automatic advance to exposure counter “01”

Film advance: Automatic with built-in motor

Film rewind: Automatic with built-in motor (with auto return/auto stop function), mid- roll rewinding possible

Drive modes: Single frame, continuous, 10 sec. delay selftimer

Winding speed: Up to approximately 2.3 frames/sec. continuous shooting (“C” mode) (using a new battery, at normal temperature, and based on Contax test- ing standards)

Exposure counter:Auto reset additive type for display panel and viewfinder

Accessory shoe: Direct X contact (with TLA flash interlocking contacts)

Custom functions:See list of custom functions on page 86

Camera back: Opened and closed with camera back release lever, removable, with film check window

Batteries: 3V lithium battery (CR2) x 2

Battery check: Auto check, indicated on display panel

104 105