4. Using the selftimer

Use this mode to include yourself in the photograph.

Standard

Over

Under

For example, if the ABC Exposure is used at the 18th frame, the exposure counter is as follows:

Display panel

Set to selftimer mode

Set the drive mode to " ".

For instructions on setting the drive mode, see page 31.

Adjust the focus, then press the shutter button.

The selftimer is activated and the shut- ter is released after 10 seconds. The selftimer LED on the front of the camera flashes while the selftimer is operating.

 

1st frame

2nd frame

3rd frame

4th frame

Focus position

Standard

 

 

Over

Under

(repeated)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standard

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Counter

 

 

18

 

 

 

 

19

 

 

20

 

 

 

 

21

 

 

 

 

 

 

 

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Both left and

Left flashing

Right flashing

Both left and

 

right flashing

 

 

 

 

 

 

 

 

 

 

right flashing

When used with exposure compensation in the ABC Exposure mode, the exposure value is used as the base value for autobracketing.

Metering is repeated for each photograph, and compensation determined for the metered value at that time. It is recommended that the AE lock be set before beginning photogra- phy if autobracketing without the effects of changing brightness is required.

If the compensation range exceeds the compensation limits of the camera, photographs are taken at the limit of the possible compensation values.

If the main switch is turned “OFF” and “ON” again in the ABC Exposure mode, ABC pho- tography begins again from the first frame for three frames.

The flash cannot be used in the ABC Exposure mode.

” The compensation sequence may be changed to over-exposure standard expo- sure under-exposure (page 87).

Selftimer LED

When using the selftimer, light entering the viewfinder when the eye is moved away may interfere with a correct reading of incident light. In such cases, fit the viewfinder shade adapter to the viewfinder before taking photographs. (page 14)

Use a tripod when taking photographs with the selftimer.

The selftimer cannot be used when the bulb mode is set.

If the shutter button is pressed after the selftimer has been activated, the selftimer time is reset.

To cancel the selftimer after it has been activated, turn the main switch off.

64

65

Page 38
Image 38
Kyocera NX instruction manual Using the selftimer