4.Mounting and removing lenses
5. Holding the camera
Mount mark | Lens mark |
<Removing lenses>
<Mounting lenses>
Remove the camera's body cap and the lens rear cap.
Line up the mount mark on the lens with the lens mark on the camera, insert the lens, then turn it clockwise until a click is heard and
the lens is firmly engaged.
•Use Contax
•Contax 645 system lenses can be used by mounting on an
<Removing lenses>
Press the lens release button and turn the lens counterclockwise all the way until it stops, then pull it forward to remove it.
•Be careful not to touch the lens surface or the inside of the body when mounting and removing lenses.
•When replacing the lens while film is loaded in the camera, do so in the shade, avoiding direct sunlight.
Tuck in your elbows and stabi- lize the camera.
Hold your breath when pressing the shutter button.
Keep your arms and hands relaxed and press the shutter button gently.
It is important to hold the camera firmly in order to achieve sharp pho- tographs. Unsharp photographs are often due to camera shake caused by the photographer's abrupt motion when taking a picture.
Practice working with the camera and making both vertical and horizontal com- positions. Find positions that are comfortable for you. Propping yourself or the camera against a building or tree can often be effective.
•When taking photographs in dark places or in other cases where the shutter speed is slow, use a tripod to avoid camera shake.
Lens release button
18 | 19 |
