LaCie 500 Series LCD Monitor

User Manual

Installing Your LaCie Monitor

page 11

Highest

30°

Tilt 

Stand

 

Position

 

DVI-I

 

DVI-D

 

 

D-SUB

DC-Out

Fig. 04

Fig. 05

Fig. 06

5.Place hands on each side of the monitor to tilt the LCD panel to a 30-degree angle and gently tilt in an upward direction to the highest position (Fig. 04).

6.Attach all cables to their appropriate interfaces (Fig. 04).

7.To keep the cables neatly organized, place them into the cable management system that is built into the stand.

Place the D-SUB cable (not included) and the power cable into the specific hooks as indicated (Fig. 05).

Place the DVI cable and the 15-pin mini D-SUB to DVI-A cable into the hooks as indicated (Fig. 06).

When using the monitor in Portrait mode, place the DVI cable and the 15-pin mini D-SUB to DVI-A cable into the hooks as indicated (Fig. 07).

8.Make sure all cables are resting flat against the stand (Fig. 06). Please provide room for Tilting, Rising, and Lowering the monitor screen as well as screen rotation when you manage cables.

continued on next page>>

Fig. 07

CAUTION: Incorrect cable connections may: result in irregular operation, damage display quality/components of LCD module, and/or shorten the module’s life.

Page 11
Image 11
LaCie 526 user manual Tilt , Stand, DC-Out