LaCie 500 Series LCD Monitor

User Manual

Using Your LaCie Monitor

page 15

3.1.5.Remove the Monitor Stand for Mounting

To prepare the monitor for mounting:

1.Disconnect all cables.

2.Place hands on each side of the monitor and lift it to the high- est position (Fig. 12).

3.Place monitor face down on a non-abrasive surface (Fig. 17).

Q u i c k

Release

Lever

Fig. 18

4.Place one hand around the base and one hand on the Quick Release Lever. Move the Quick Release Lever to the right, as indicated by the arrows (Fig. 18).

5.Lift the bottom of the stand to unhook it from the monitor (Fig. 19). The monitor is now ready for mounting.

Fig. 17

Fig. 19

TECHNICAL NOTE: Use only VESA-compatible alternate mounting methods (100 mm pitch).

IMPORTANT INFO: Please handle with care when removing the monitor stand.

Page 15
Image 15
LaCie 526 user manual Remove the Monitor Stand for Mounting, I c k Release Lever