LaCie 500 Series LCD Monitor
User Manual
OSD Control Menu Functions
page 30
Tag | Menu title | Explanation |
Tag4 | V. RESOLUTION | Adjusts the vertical size by increasing or decreasing the setting. Press the RIGHT button to |
|
| expand the height of the image on the screen. Press the LEFT button to narrow the height of |
|
| the image on the screen. |
| EXPANSION | Sets the zoom method. |
|
| FULL: The image is expanded to 1920 x 1200 regardless of the resolution. |
|
| ASPECT: The image is expanded without changing the aspect ratio. |
|
| OFF: The image is not expanded. |
|
| CUSTOM: When CUSTOM is selected as the Expansion mode, you can adjust the H. |
|
| ZOOM, V. ZOOM, and ZOOM POS. |
| H.ZOOM | The image is expanded from 1 to 3 times in the horizontal (H. EXPANSION) direction by |
| (Available in Custom | 0.01 increments. |
| Expansion mode only) |
|
| V.ZOOM | The image is expanded from 1 to 3 times in the vertical (V. EXPANSION) direction by 0.01 |
| (Available in Custom | increments. |
| Expansion mode only) |
|
| ZOOM POS. | Sets the point from which the screen will be expanded when either H.ZOOM or V.ZOOM |
| (Available in Custom | are adjusted in Expansion mode. Options are CENTER and LEFT TOP. |
| Expansion mode only) | CENTER: H.ZOOM expands the image outward, from the center to the sides of the screen. |
|
| V.ZOOM expands the image from the center to the top and bottom of the screen. |
|
| LEFT TOP: Indicates the set point for image expansion (TOP in V. ZOOM, LEFT in |
|
| H.ZOOM). The image will not expand past the TOP or the LEFT of the screen if the resolu- |
|
| tion does not fill the screen. The image can be expanded past the right and bottom edges of |
|
| the screen. |
Tag5 | GAMMA | Allows you to manually select the brightness level of the grayscale. There are five selections: NO |
| SELECTION | CORRECTION, 2.2, OPTION, PROGRAMMABLE, and CUSTOM. |
|
| NO CORRECTION: No Correction possible. |
|
| 2.2: The value is fixed at 2.2. |
|
| OPTION: Two choices offers two choices. |
|
| 1: This setting is recommended for Video sources. Gray areas look much brighter than the |
|
| NO CORRECTION setting. |
|
| 2: The value near DICOM gamma is set up in a factory and the luminosity difference be- |
|
| tween gradations adjusts toward a legible state. |
|
| PROGRAMMABLE: The brightness of the grayscale is adjusted to your preference using |
|
| LaCie blue eye pro software. |
|
| CUSTOM offers two options: |
|
| Custom Value: The gamma value is selected from a rate of 0.5 to 4.0 by 0.1 steps. |
|
| When the COLOR CONTROL is sRGB, the value is fixed at 2.2 and NOT ADJUSTABLE. |
|
| Offset: The OFFSET digitally adjusts the black level after the signal is converted from analog |
|
| to digital. |
continued on next page>>
