LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 36
4.10. Using the Picture Mode Function
Choose the Picture mode that is best suited to display the
selected content. You may adjust the BRIGHTNESS, AUTO
LUMINANCE and UNIFORMITY while in this mode. There are
four Picture modes: STANDARD, sRGB, Adobe RGB, and PRO-
GRAMMABLE.

•To access the Picture mode, press the RESET button while

the OSD menu is not active.

•To select a mode, press the LEFT and RIGHT button.

•To exit the Picture mode, press the EXIT button.

•Scroll the menu using the UP and DOWN buttons and

make all adjustments with the LEFT and RIGHT buttons.

Picture Mode Purpose Color Control Gamma Selection (Advanced Menu)

STANDARD Save the color set-
tings according to
your preference.
Settings made via the OSD
COLOR CONTROL.
Settings made via the OSD GAMMA Selection.
sRGB Save sRGB set-
tings.
Fixed at 6500K for sRGB
(OSD COLOR CONTROL
adjustment not available).
Fixed to GAMMA for sRGB (OSD GAMMA adjustment
not available).
Adobe RGB Save Adobe RGB
settings.
Fixed at 6500K for
Adobe RGB (OSD COLOR
CONTROL adjustment not
available).
Fixed at 2.2 for Adobe RGB (OSD GAMMA adjustment
not available).
PROGRAMMABLE Save the LaCie
blue eye pro set-
tings. (BRIGHT-
NESS is disabled.)
Fixed at PROGRAMMABLE
(OSD COLOR CONTROL
adjustment not available).
Fixed at PROGRAMMABLE (OSD GAMMA adjustment
not available).
TECHNICAL NOTE: When PROGRAMMABLE is selected, you
cannot adjust the BRIGHTNESS or use AUTO LUMINANCE.
TECHNICAL NOTE: To make adjustments using Adobe RGB
mode, choose sRGB mode then press SELECT.