Lanier 5455, 5470 manual 105

	Copy/Document Server Settings
Menu	Description
Staple Position	Specify which Top 2 staples or Bottom is
	shown on the initial display with priority.
	Default is Stack.
Paper Eject: Always Rotate 180	If you want to copy on the paper with
degrees	letterhead, the machine rotates the image
	correctly. To use this function, select Yes.
	Default is No.
Duplex: Auto Eject	When making two-sided copies from one-
	sided originals, if the last original is an odd
	page, the last copy is automatically
	delivered with the reverse side blank. You
	can cancel this setting.
	When you set one original at a time in the
	Document Feeder or set an original on the
	Exposure Glass, this function does not
	come into effect.
	The default is Yes.
Combine: Auto Eject	As a default setting, even if the number of
	originals in the optional Document Feeder is
	less than the number required in the
	selected Combine mode, the lacking
	number of copies are automatically made in
	blank. You can cancel this setting.
	When you set one original at a time in the
	Document Feeder or set an original on the
	Exposure Glass, this function does not
	come into effect.
	The default is Yes.
Memory Full Auto Scan Restart	When the memory becomes full while
	scanning originals, the copier can make
	copies of the scanned originals first, then
	automatically proceed to scanning the
	remaining originals.
	You can enable or disable this function.
	If you select Yes:
	When the memory becomes full, the copier
	stops operating, allowing you to remove the
	copy pages delivered on the output tray.
	If you select No:
	You can have the copier unattended to
	make all the copies, but the resulting sorted
	pages will not be sequential.
	Default is No.

User Tools 5 - 21