Using Auto Start

Using Auto Start

When the copier is first turned ON, it takes five and one-half minutes for it to warm-up and come to its Ready condition. During this time, you can set up your copy job, press the Start key and walk away. You can even do this while your copier is in the Energy Saver mode. When the copier comes to its Ready condition, it automatically copies your job.

1

2

3

4

Place the original document in the Document Feeder or on the Exposure Glass.

Make your copy requirement selections.

Press the Start key.The indicator light in the Start key flashes alternately green and red.

The copier automatically begins copying when the copier comes to its Ready condition.

When the copier comes to its Ready condition, the indicator light in the Start key turns green.

Note: To cancel Auto Start, press the Clear/ Stop key.

Selecting Copy Quantities

The copier automatically selects a copy quantity of one copy.

•If desired more than one copy, enter the number from the 10-key pad.

•The maximum copy quantity that you can enter is 999.

If more than one copy of your original is required, enter the number of copies you desire using the key pad.

•

•

Press the Clear/Stop key to clear an entry if you entered an incorrect quantity.

If no quantity is entered, one copy is automatically selected by your copier.

3 - 2

Copier Functions