Bypass Copying

Bypass Copying

If you want to make a copy on a transparency for overhead projection (OHP), or have the need to use special paper, letterhead, or paper other than that which is in the copier Paper Tray, you may feed this paper into the Stack Feed Bypass Tray. See “Using Stack Feed Bypass” on page 4-5.

•Bypass does not work in the Duplex mode.

•Bypass copying bypasses the Paper Trays and feeds copy paper from the Stack Feed Bypass Tray.

Using Stack Feed Bypass

Use the Stack Feed Bypass to feed standard paper, transparency, label stock, tracing paper, letterhead, and other special purpose papers measuring from 8.5” x 5.5” to 11” x 17”.

•The copier automatically detects standard paper sizes: 11" x 17", 8.5" x 11", 5.5" x 8.5".

•If you are using non-standard size paper, you should enter the paper size. See “Non-Standard Size Paper” on page 4-6.

1If Duplex mode is selected, touch the Duplex/Combine key and turn it OFF. 2 Place your original on the Document Feed Tray or on the Exposure Glass. 3Open the Bypass Paper Tray.

•The Bypass Tray indicator turns ON in the display.

•If the indicator does not turn ON, the copy mode is set for duplex. Change the copy mode to single side copying.

4Adjust the Bypass Paper Guides to the width of the copy paper.

•Be sure to place the copy paper in the same direction as the original.

Copying Methods

4 - 5