Cleaning
Cleaning
A dirty Exposure Glass or Document Feeder Belt may have an effect on the quality of your copies. Inspect them and clean as necessary.
Cleaning the Machine
Wipe the copier with a soft, damp cloth and then dry it.
Note: Do not use chemical cleaner or organic solvent, such as thinner or benzene. If they get into the copier of melt plastic parts, a failure might occur.
Do not clean parts other than those specified in this Operator Guide. Such parts should be cleaned by your service representative.
Cleaning the Exposure Glass
Clean the Exposure Glass using a clean dry cloth.
Cleaning the Document Feeder
Clean the Document Feeder Belt using a dry clean cloth.
8 - 14 | Service and Supplies |