Overhead Transparencies and Thick Paper
Overhead Transparencies and Thick Paper
To make copies on OHP transparencies or thick paper, you need to specify the paper type. This function is not available in Duplex mode.
1 If Duplex mode is selected, touch the Duplex key to turn it OFF.
2 Place the original on the Document Feed Tray or on the Exposure Glass. 3Open the Bypass Paper Tray.
4Adjust the Bypass Paper Guides to the width of the transparencies.
•Be sure to place the transparencies in the same direction as your original.
5Insert the OHP transparency or thick paper face up until the beep sounds.
6 Press the (#) key on the keypad.
7 Select OHP or Thick Paper by touching the appropriate key.
8 Touch the OK key.
9 With the originals set, press the Start key.
Copying Methods | 4 - 27 |