Using the Finisher

Using the Finisher

The Finisher functions available when using the optional Finisher are:

•Making Non-Sorted Copies: All copies exit to the Finisher Proof Tray (top tray).

•Making Sorted Copy Sets: One copy of each original exits into the Finisher Shift Tray. Each set (or the top sheet only of each set in the saddle stitch finisher) is shifted for ease of separation when you retrieve your copies.

•Making Stacked Copy Sets: The copies of each original are stacked together in the Finisher Shift Tray. Each stack is shifted for ease of separation when you retrieve your copies.

•Stapling your copy sets.

•Three hole punching copy sets with optional Punch. (not available with the saddle stitch finisher).

Selecting Non-Sort Mode

Non-Sort copying is the default setting. Non-Sort copying is for making copies that require no stacking or sorting.

1 If either the Sort, Rotate Sort, Stack, or Staple Indicator are highlighted, touch the highlighted key(s) until all Sort, Stack, and Staple keys are OFF.

2 Place the originals face-up in the Document Feeder or face-down on the Exposure Glass. 3 Make the copy requirement selections. See “Making Your Copy” on page 1-3.

4 Press the Start key to begin copying. Your copies exit into the Finisher Proof Tray (top bin) of the Finisher.

7 - 2

Using the Finisher