Interrupt Copying
You can interrupt a copy job that is in progress to make a quick copy of another original, without disrupting the original copy job settings or copy count. Do this by using the Interrupt feature.
1 Press the Interrupt key.
2 When the copier stops:
•Remove the remaining originals from the Document Feeder.
•Position the new original on the Exposure Glass.
3 Make the copy requirement selections. See “Making Your Copy” on page
5 When all Interrupt Copies are finished, press the Interrupt key again to cancel the Interrupt mode.
Note: The previous copy quantity, copy ratio, copy darkness, and paper size are automatically reset.
6 Put the remaining originals that you removed in Step 2, back into the Document Feeder.
7 Press the Start key to continue the original copy job.
4 - 26 | Copying Methods |