Adding Toner
The Add Toner Indicator turns ON when toner is needed. If copying is continued while the Toner Indicator is ON, copies will gradually become lighter until the copier stops and the Add Toner Indicator begins flashing.
The Add Toner Indicator may also begin flashing during long copy runs of multiple dark originals, even though there is toner left. Should the Add Toner Indicator begins to flash, the copier stops making copies. Open and close the Front Cover. When sufficient toner has been fed, the Add Toner Indicator turns OFF and the Ready Indicator in the Start key turns ON. Press the Start key to resume copying.
For best copying results, use only Lanier supplies which are designed, engineered, and tested to maximize the life and performance of Lanier copiers.
1 Open the Front Cover.
2 Pull out on the handle on the Toner Bottle Holder until the Toner Bottle holder is fully opened.
3
4
Pull the green lever and gently pull the Toner Bottle out.
Hold a new Toner Bottle horizontally and shake it five or six times to loosen the toner.
Note: Do Not remove the cap before shaking the Toner Bottle.
Service and Supplies | 8 - 5 |