Lanier 5455, 5470 System Setting - Basic Page

			System Settings
System Setting - Basic Page 1
	Menu	Description
	Operation Panel Beeper	The beeper (key tone) sounds when a key is
		pressed. This beeper can be turned ON or
		OFF.
		Default is On.
	Ready Operation Panel Beeper	Specify whether to sound the beeper when
		your unit comes to Ready for copying
		immediately after Energy Saver mode is
		deactivated or the power is turned ON.
		When the Control Panel beeper is set to
		Off, the beeper does not sound even if the
		Ready Control Panel Beeper is set to On.
		Default is On.
	Copy Count Display	The copy counter can be set to show the
		number of copies made (count up) or the
		number of copies to be made (count down).
		Default is Up (count up).
	Auto Response (Human) Sensor	If your copier does not detect anyone using
		it for a certain period of time, it switches
		automatically to one of the preset modes:
		•	AutoReset
		•	System Reset
		•	Low Power mode
		•	Auto Off
	Auto Tray Switching (Paper	If you load paper of the same size in two or
	Drawers)	more trays, your copier automatically shifts
		to the other tray when the tray in use runs
		out of paper. You can set or cancel this
		setting.
		• If you select Yes, and a paper
			of a different orientation is
			loaded, limitless paper loading
		•	will take place for loading.
			If you select No, and paper of
			the same size and orientation
			is not loaded, your copier will
			stop and instruct you to load
			paper.
		Default is Yes.
	Auto Off Timer	Your copier turns itself off automatically to
		conserve energy after your copy job is
		finished, after the selected time. This
		function is called “Auto Off”. The time can
		be set from 1 to 240 minutes.
		Default is 90 minutes.

User Tools 5 - 3