Making Copies

Making Copies

Place your original(s) on the copier in one of the following ways:

•Face-up in the Document Feeder

•Face-down, directly on the Exposure Glass

Main Power Switch

The Main Power switch supplies power to the copier. To supply power to the copier, press the Main Power Switch to ON.

•

•

The Message Display shows, “Now loading....” After about five and one-half

minutes your copier comes to its Ready condition and three beeps sound (if beep is turned ON.) This indicates the copier is ready for you to begin copying.

If the User Code feature is activated, the message "Input user code, then press #" is displayed. Enter your User Code. See “Entering User Codes” on page 3-1.

Operation Key

The Operation key is on the far right side of the Control Panel. It turns the copier operation on and off while maintaining power to the copier.

If the On indicator light is OFF and the Main Power indicator light is ON, press the Operation key.

•

•

The On indicator light turns ON and the Message Display lights up.

To turn the copier OFF, press the Operation key again. The On indicator light turns OFF.

Making Copies

1 - 1