System Settings
Menu | Description |
|
|
Low Power Shift TIme | Your copier enters Low Power mode |
| automatically after your job is finished, |
| after selected time. The time can be set |
| form 1 to 240 minutes. |
| Default is 15 minutes. |
|
|
Low Power Timer | Your copier enters the Energy Saver mode |
| automatically after your copy job is |
| finished, after the selected time. The time |
| can be set from 10 to 999 seconds, or 0. |
| When set to 0, Energy Saver mode will not |
| be activated, |
| Default is 60 seconds. |
|
|
ADF Orig. Ejection (RADF) | As a default setting, the scanned originals |
| from the Document Feeder (RADF) are |
| ejected to the RADF external tray. But, if |
| there is no space to attach an RADF |
| External Tray, you can change the output |
| tray to the RADF tray. |
| Default is ADF Ext. Tray. |
|
|
<F/F4> Size Setting | Currently, three types of F sizes are |
| available; 8.5” x 13”. 8.25” x 13”, and 8” |
| x 13”. |
| The Document Feeder sensor cannot |
| distinguish these three types of originals. |
| This function sets the F size from the |
| Document Feeder sensor. |
| Auto Paper Select or Auto Reduce/Enlarge |
| is the case of F size originals functions |
| based on this setting. |
| Default is 8.5” x 13”. |
|
|
5 - 4 | User Tools |