Document Server
•Enter the new file name using the letter keys on the display panel.
Note: You can enter up to 8 letters.
Note: To switch to the capital letter mode or small letter mode, press the Upper Case or Lower Case key.
Note: To change the letter entered, press the Back Space, Clear, or Clear/Stop key and enter new letters. To delete the entered letters in 1 letter steps, press the BackSpace key. To delete all the entered letters, press the Clear or Clear/Stop key.
•Touch the OK key.
4 Enter your password.
Note: If you do not wish to enter a password, go to step 5.
To set the password•Touch the Change Password key.
•Enter the password using the number keys (4 digits).
Note: To change the number entered, press the Clear or Clear/Stop key and enter a new number.
•Touch the OK or # key.
5 Set your originals either on the exposure glass or into the document feeder.
6 Make any desired settings.
Note: Touch the Scanning Complete key to cancel the file name, password, or print settings and return to the “Document Server: Files” display.
Note: For details, see the
explanations of each function in this manual.
7 Press the Start key.
The document is saved in the Document Server. The saved documents are displayed on the “Document Server: Files” display.
6 - 14 | Special Copier Functions |