5: Configuration Using Web Manager
Endpoint Configuration Endpoint Configuration
Settings Description
Local Port
Enter the local port number.
Auto increment for active
connect
Select to auto-increment the local port number for new outgoing
connections. The range of auto-incremented port numbers is
50,000 to 59,999 and loops back to the beginning when the
maximum range is reached.
Remote Port
Enter the remote port number.
Remote Host
Enter the IP address of the remote device.
Common Option Settings Description
Telnet Com Port Cntrl
This field is available for configuration only when Active Connect
is set to None. Select Enable to permit Telnet communication to
the unit. The Telnet Com Port Cntrl feature is used in
conjunction with the Com Port Redirector (CPR) utility. (See the
CPR Online Help for details.)
Terminal Name
This field is available for configuration only when Telnet Mode is
set to Enable.
Use the terminal name for the Telnet terminal type. Enter only
one name. When this option is enabled, the unit also reacts to the
end of record (EOR) and binary options, which can be used for
applications such as terminal emulation to IBM hosts.
Connect Response
A single character is transmitted to the serial port when there is a
change in connection state. Default setting is None.
Use Hostlist
If this option is set to True, the device server scrolls through the
host list until it connects to a device listed in the host list table.
Once it connects, the unit stops trying to connect to any others. If
this connection fails, the unit continues to scroll through the table
until it connects to another IP in the host list.
The host list is disabled for Manual Mode and for Modem Mode.
The unit will not accept a data connection from a remote device
when the host list option is enabled.
LED
Select Blink for the status LEDs to blink upon connection or
None for no LED output.
Disconnect Mode Settings Description
On Mdm_Ctrl_In Drop
Set to Yes for the network connection to or from the serial port to
disconnect (drop) when Modem Control In transitions from an
asserted state to not asserted state. The default setting is No.
Hard Disconnect
When set to Yes, the TCP connection closes even if the remote
site does not acknowledge the disconnect request.
Micro125 User Guide 31