Lantronix 900-588 manual Connection Settings UDP, To configure a channel’s UDP settings

		5: Configuration Using Web Manager
Disconnect Mode Settings		Description
Check EOT (Ctrl-D)		Select Yes to drop the connection when Ctrl-Dor Hex 04 is
		detected. Both Telnet Com Port Cntrl and Check EOT
	(Ctrl+ D) must be enabled for Disconnect with EOT to function
	properly. Ctrl+D is only detected going from the serial port to the
		network. The default setting is No.
Inactivity Timeout		Use this parameter to set an inactivity timeout. The unit drops the
		TCP connection to port 10001/10002* if there is no activity on the
		serial line before the set time expires. Enter time in the format
		mm:ss, where m is the number of minutes and s is the number of
		seconds. To disable the inactivity timeout, enter 00:00.
		Note*: The default port number for Port 1 is 10001 and 10002 for
		Port 2. However, port numbers may be set to a different value.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

Connection Settings - UDP

To configure a channel’s UDP settings:

1.On the main menu, click Connection. The Connection Settings window for the selected channel displays.

2.In the available fields, enter or modify the following information:

Figure 5-8. UDP Connection Settings

Micro125 User Guide 32