Lenovo 2592, 2593, 2594 Inch hard disk drive area, Rack handle left Rack handle right, Front panel

1

3.5-inch hard disk drive area

The EMI integrity and cooling of the server are protected by having all drive bays covered or occupied. The number of the installed hard disk drives in your server varies by model. The vacant hard disk drive bays are occupied by dummy hard disk drive trays.

For server models with up to eight 3.5-inch hard disk drives, the hard disk drive bay numbers are marked on the top edge of the front bezel.

Figure 5. 3.5-inch hard disk drive bay numbers (top view of the server)

2

Rack handle (left)

7

Rack handle (right)

If your server is installed in a rack cabinet, you can use the rack handles to help you slide the server out of the rack cabinet; or use the rack handles and screws to secure the server in the rack cabinet so that the server cannot slide out, especially in vibration-prone areas. For more information, refer to the Rack Installation Instructions that comes with your server.

3

Pull-out information card

The machine type, model, and serial number label of the server is attached on the pull-out information card. See “Machine type, model, and serial number label” on page 14.

4

Front panel

For detailed information about the controls, connectors, and status LEDs on the front panel, see “Front panel” on page 19.

5

Diagnostic panel

The diagnostic panel varies by model. For detailed information, see “Diagnostic module” on page 21.

6

Slim optical drive

Some server models come with a slim SATA optical drive (DVD-RW or DVD-ROM).

Chapter 3. Product overview 17