Lenovo 2594, 2593, 2579, 2577 Removing and reinstalling the front bezel, Removing the front bezel

Removing and reinstalling the front bezel

Attention: Do not open your server or attempt any repair before reading and understanding “Safety information” on page iii and “Guidelines” on page 69.

This topic provides instructions on how to remove and reinstall the front bezel.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another computer for reference.

Notes:

•This topic applies only to server models that support 2.5-inch hot-swap hard disk drives.

•Depending on the model, your server might look slightly different from the illustrations in this topic.

To remove and reinstall the front bezel for server models with 2.5-inch hot-swap hard disk drives, do the following:

1.Remove the three screws 1 remove it from the chassis.

that secure the front bezel and then pivot the front bezel outward to

Figure 37. Removing the front bezel

Chapter 6. Installing, removing, or replacing hardware 73