ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)

The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.

Figure 22. ThinkServer RAID 700 Adapter

1Ports 7-4

2Ports 3-0

3Board-to-board connector

1

Ports 7-4

Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 38.

2

Ports 3-0

Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 38.

3

Board-to-board connector

Used to connect a ThinkServer RAID 700 Battery. See “Installing or removing the ThinkServer RAID 700 Battery” on page 94.

Expander card

This topic provides information to help you locate the connectors on the expander card if your server has one installed in the lower slot of the riser card assembly 1.

The expander card works together with the RAID card by expanding the ports on the RAID card so that the server can support up to 16 2.5-inch hard disk drives.

Note: The server must have a RAID card and an expander card installed to support more than eight hard disk drives.

34ThinkServer User Guide

Page 46
Image 46
Lenovo 2595, 2593, 2594, 2579, 2577, 2592 manual Expander card, Ports, Board-to-board connector