Lenovo 2595, 2593, 2594, 2579, 2577, 2592 manual Removing the TPM, Installing the TPM

6. Insert the TPM into the TPM connector on the system board.

Figure 66. Installing the TPM

7.If you have lifted up the riser card assembly 1, reinstall it into the chassis. See “Replacing the riser card assembly 1” on page 136.

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To complete the installation, go to “Completing the parts replacement” on page 153. Then, you can configure the TPM function in the Setup Utility program. See “Configuring the TPM function” on page 58.

Removing the TPM

Attention: Do not open your server or attempt any repair before reading and understanding “Safety information” on page iii and “Guidelines” on page 69.

This topic provides instructions on how to remove the TPM if the server has one installed.

106ThinkServer User Guide