Installation • Instalación | english | ||
Installation • Instalação | |||
| |||
wrong • no correcto | correct • correcto |
| |
incorrect • incorrecto | correct • correcto |
| |
|
| Note: Continuous slope | |
|
| It is important to avoid water pockets | |
|
| when using a pressure hose as a feed | |
|
| line! | |
Note: Continuous slope!
Water pockets must also be avoided when laying a feed pipe.
| Electrical installation • Instalación eléctrica | english |
| Installation électrique • Instalação elétrica | |
|
| |
|
| BEKOMAT 21 |
|
| Note before wiring: |
|
| • Check type plate (1) for permis- |
3 |
| sible mains voltage and ensure |
|
| conformity! |
| 4 | • Please ensure that the installation |
2 | 8 | is carried out according to the |
| ||
| 7 | valid regulations. |
|
| • Please assign terminals as |
| 6 | indicated! |
| • Remove screws (3) and lift off hous- | |
|
| |
| 5 | ing top (2) |
|
| • Unscrew cable fitting (7), remove |
|
| blanking disk (8) and guide |
|
| cable for power supply (4) through |
| 1 | cable fitting. |
|
| • Join cable to terminal connector (5) |
|
| (The terminal connector can be pul- |
|
| led off.) |
|
| Terminal assignment |
|
| L = phase conductor (black) , N = neu- |
|
| tral conductor (blue), PE = protective |
|
| conductor (green&yellow) |
|
| • Plug terminal connector (5) to con- |
|
| trol PCB (6) |
|
| • Pull cable (4) tight and screw down |
|
| cable fitting (7) |
|
| • Put back housing top and tighten |
|
| screws (3) |
8 | BEKOMAT 21, 21 PRO |
