Leupold FX-ll, VX-II, FX-I, FX-3, VX-3 Understanding parallax, About fixed parallax distance scopes

Models: FX-ll FXTM-I VX-3 FX-3 FX-I VX-II VX-I

1 62
Download 62 pages 11.32 Kb
Page 29
Image 29

Understanding parallax

Parallax is the apparent movement of the target relative to the reticle when you move your eye away from the center point of the eyepiece.. It occurs when the image of the target does not fall on the same optical plane as the reticle.. This can cause a small shift in the point of aim..

Maximum parallax occurs when your eye is at the very edge of the exit pupil.. (Even in this unlikely event, our 4x hunting scope focused for 150 yards has a maximum error of only 8/10ths of an inch at 500 yards..)

At short distances, the parallax effect does not affect accuracy.. (Using the same 4x scope at 100 yards, the maximum error is less

than 2/10ths of an inch..) It is also good to remember that, as long as you are sighting straight through the middle of the scope, or close to it, parallax will have virtually no effect on

accuracy in a hunting situation..

About fixed parallax distance scopes

Any fixed focus optical system can be adjusted to be parallax free at only one distance.. Most Leupold scopes are adjusted at the factory to be parallax free at 150 yards.. However, there are exceptions:

1..Leupold rimfire scopes are set to be parallax free at 60 yards..

2..Leupold shotgun/muzzleloader scopes are set to be parallax free at 75 yards..

29

Page 29
Image 29
Leupold FX-ll, VX-II, FX-I, FX-3, FXTM-I, VX-3 owner manual Understanding parallax, About fixed parallax distance scopes