Leupold FX-3, VX-II, FX-ll, FX-I, FXTM-I, VX-3 owner manual Leupold PRODUCT Service

2..Make sure the action of your rifle is properly bedded in the stock, and that all receiver screws are tight and have been tightened in the sequence recommended by the manufacturer.. A loosely fitted stock can cause changes to the point-of-impact..

3..When test firing a rifle to check the point-of-impact relative to windage and elevation adjustments, be sure to fire from a solid bench with sandbags supporting the forearm and buttstock..

4..Be sure to use factory-loaded ammunition of the same bullet type, weight, and preferably, lot number.. If one type of ammu- nition does not shoot well, try another brand or bullet weight..

5..Be certain that both the barrel and chamber are clean.. Heavy factory grease or copper fouling on an older one can diminish the accuracy of the firearm..

Leupold PRODUCT Service

If your Leupold Golden Ring scope fails to perform in any way, you may return it directly to the factory (or one of our international service centers) for service.. We recommend contacting Leupold Technical Service at 1-800-Leupold (538-7653), and following these shipping instructions:

1..Remove the rings and any other accessories from the scope..

2..Record the serial number of the scope and keep it for your records..

3..Include a note with your name, address, telephone number, E-mail, and a description of the problem..

4..Pack the scope in its original box (if you have it), as this is the

39