Leupold FX-3, VX-II, FX-ll, FX-I, FXTM-I, VX-3 owner manual Installing a lens attachment

32

1..Turn the focus ring counterclockwise (when viewing though the eyepiece) until it stops..

2..Turn the focus ring clockwise until the “10m” mark aligns with the indicator mark on the bell of the scope..

3..From this point, all readings of the focus ring are in numerical order when the ring is turned clockwise from the shooting position..

4..Adjust the ring as you would a standard adjustable objective model..

installing a lens attachment

Many Leupold scopes offer threaded objective and eyepiece rings to

allow for the attachment of lens covers and a variety of Alumina® accessories.. These attachments thread directly into the objective or eyepiece rings.. Turn until finger tight – do not over tighten..

To adjust the parallax distance,

turn the focus ring.