How to add a memory card
The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB) for the Lexmark E232 and up to 128MB (for a total of 160MB) for the Lexmark E330 and Lexmark E332n. The Lexmark E230 does not support additional memory.
CAUTION: If you are installing a memory card after setting up the printer, turn the printer off and unplug the power cord before continuing.
Note: Memory options designed for other Lexmark printers may not work with your printer.
1Access the system board (see How to access the system board).
2 Push open the latches on both ends of the memory connector.
3Unpack the memory card.
Warning: Memory and flash memory cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4Align the notches on the bottom of the card with
the notches on the connector.
5Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6Make sure each latch fits over the notch on each end of the card.
7Reattach the system board cover (see How to reattach the system board cover).
8See How to get the printer driver to recognize installed options.
How to install options
45
