Lexmark E332n Network menu, Understanding the printer configuration menus, Setting, Values, Auto

Network menu

Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network Opt <x>).

Setting	Use this setting to:	Values
NPA Mode	Send print jobs to the printer and query	•	Off
	printer status information	•	Auto*
	simultaneously.
MAC Binary PS	Configure the printer to process	• Off—The printer filters PostScript print jobs
	Macintosh binary PostScript print jobs.		using standard protocol.
		• On—The printer processes raw binary
			PostScript print jobs from computers using
			the Macintosh operating system. This setting
			often causes Windows print jobs to fail.
		• Auto*—The printer processes print jobs
			from computers using either Windows or
			Macintosh operating systems.
Set Card Speed	Automatically detect the connection	• Auto*—The printer detects current network
	speed of your network. You can disable		speed.
	this setting to set the speed manually.	• 10Mbps†, Half Duplex—Forces the printer
			to try to connect to the network only at
			10Mbps, Half Duplex.
		• 10Mbps, Full Duplex—Forces the printer to
			try to connect to the network only at 10Mbps,
			Full Duplex.
		• 100Mbps, Half Duplex—Forces the printer
			to try to connect to the network only at
			100Mbps, Half Duplex.
		• 100Mbps, Full Duplex—Forces the printer
			to try to connect to the network only at
			100Mbps, Full Duplex.
* Factory default
† Megabits per second

Understanding the printer configuration menus

85