Lexmark 4036-304 manual Error 31 No hard drive

4036-304

		MFD
Error number and	Number	controller	LED pattern			Action
description	of beeps	card	(on=	, off=	)
		generation
Error: 24 - Serial port failure	2	1st				Problem with TTY/Serial
						Port. Replace the MFD
						controller card.

		2nd
Error: 28 - Problem with the	2	1st	Replace the MFD
CPU			controller card.

		2nd
Error: 31 - No hard drive	3	1st	Check connections to
found.			the hard disk drive and
			associated cables for
Note: Error message not			continuity. Check power
			going to the hard disk
displayed. Only beep code			drive. Replace the
and LED patterns are			power distribution card
generated for error 31.		2nd	if no power is present. If
			power is present,
			replace the hard disk
			drive.
Error: 32 - Corrupt hard	3	1st	Replace or reformat the
disk drive			hard disk drive. See
			“Hard disk drive
Note: Error message not			refresh” on page 3-1.
displayed. Only beep code
and LED patterns are
generated for error 32.		2nd
Error: 34 - Hard Drive failure	3	1st	There was an error
			writing to the hard disk
			drive. Replace or
			reformat the hard disk
			drive. See “Hard disk
			drive refresh” on
			page 3-1.
		2nd

Problem Solving 2-3