Lexmark 4445, 4433 manual Software did not install, Make Sure Your Operating System Is Supported

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as a printer option when sending a print job, you can try uninstalling and reinstalling the software.

These are some other possible solutions. Try one or more of the following:

MAKE SURE YOUR OPERATING SYSTEM IS SUPPORTED

The following operating systems are supported: Windows Vista, Windows XP, Windows 2000 with Service Pack 3 or later, and Mac OS X version 10.3 or later.

CHECK THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON THE PRINTER BOX

CHECK THE USB CONNECTION

1Check the USB cable for any obvious damage. If the cable is damaged, use a new one.

2Firmly plug the square end of the USB cable into the back of the printer.

3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the USB symbol.

RECONNECT THE POWER SUPPLY

1Press to turn the printer off.

2Disconnect the power cord from the wall outlet.

3Gently remove the power supply from the printer.

4Reconnect the power supply to the printer.

5Plug the power cord into the wall outlet.

6Press to turn the printer on.

TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE

1Close all open programs.

2Disable any security programs.

3Do one of the following:

•In Windows Vista, click .

•In Windows XP and earlier, click Start.

4Click Computer or My Computer.

5Double-click the CD or DVD drive icon.

6If necessary, double-click setup.exe.

Troubleshooting

51