Lexmark How do I attach the installation cable?, How are infrastructure and ad hoc networks different?

The installation cable connects to a rectangular USB port on t he installing computer and the square USB port on the
printer.
How do I attach the installation cable?
The installation cable attaches to a USB port on the computer and to the square connector on the back of the printer.
This connection allows you to configure the printer for a networked or locally attac hed installation.
1Attach the large, rectangular connector to any USB port on your co mputer. USB ports may be on the front or the
back of the computer, and may be horizontal or vertical.
2Attach the small, square connector to the printer.
3Continue following the on-screen instructions.
How are infrastructure and ad hoc networks different?
Wireless networks can operate in one of two modes: inf rastructure or ad hoc.
In infrastructure mode, all devices on a wireless network communicate with eac h other through a wireless router
(wireless access point). Devices on the wi reless network must have vali d IP addresses for the curr ent network and share
the same SSID and channel as the wireless access point.
In ad hoc mode, a computer with a wireless network adapter communicates direct ly with a printer equipped with a
wireless print server. The computer must have a valid IP address f or the current network and be set to ad hoc mode.
The wireless print server must be configured to use the same SSID and channel that the comp uter is using.
Networking
81