4Press the up or down arrow button to select a Power Saver t imeout, and then press .
5Press until you exit Setup, or press another mode button.
Saving paper and energy with Eco-Mode
The Eco-Mode feature significantly cuts paper usage, reduces paper was te, optimizes energy efficiency, and saves
money.
Note: If you are using Eco-Mode, then the Eco-Mode settings override any changes you may make to individual settings
that are part of Eco-Mode.
When Eco-Mode is enabled, the printer automatically switches to the following settings:
•The printer display is dimmed.
•The printer changes to Power Saver mode after te n minutes.
•The printer prints on both sides of the paper (duplex) for co py and fax jobs, and for printing in Windows and Mac
OS X 10.6 or later (selected models only).
To enable Eco-Mode, press the 2-Sided/Eco-Mode button until the light near “Eco-Mode” comes on.
Resetting to factory se ttings
Resetting to factory default settings will delete all the printer settings you have previou sly selected.

Using the printer control panel menus

1From the printer control panel, press .
2Press the up or down arrow button to scroll to Defaul ts, and then press .
3Press the up or down arrow button to scroll to Set Defa ults, and then press .
4Press the up or down arrow button to scroll to Use Fact ory, and then press .
5When prompted to set the initial settings of your printer, make your s elections using the printer control panel
buttons.
Initial Setup Complete appears on the display.

Using a button combination (if you cannot read the current la nguage)

1Turn off the printer.
Note: If you have set the Power Saver timeout in the Se tup menu, then press and hold for three seconds to turn
off the printer.
2From the printer control panel, press and hold and , and then press and release to turn the printer on.
Note: Do not release and until Language Selection appea rs on the display, indicating that the printer
has been reset.
3When prompted to set the initial settings of your printer, make your s elections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using the printer control panel buttons and menus
18