Scan menu Quality
Original Size
Fax menu (selected models
only)
Lighter/Darker
Quality
Photo menu The following Photo options will not time out after two minutes of inactivity or af ter you
turn off the printer, but they will return to the factory default settings when a memory card
or flash drive is remove d.
Layout
Colorized Effect
Photo Size
Quality

To change the temporary settings into new defa ult settings

1From the printer control panel, press .
2Press the up or down arrow button to scroll to Defaul ts, and then press .
3Press the up or down arrow button to scroll to Set Defa ults, and then press .
Use Current appears on the display.
4Press again to select Use Current.
5Press until you exit Setup, or press another mode button.

To disable the settings timeout feature

You can disable the settings timeout feature if you do not want t he printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1From the printer control panel, press .
2Press the up or down arrow button to scroll to Device S etup, and then press .
3Press the up or down arrow button to scroll to Clear Se ttings Timeout, and then press .
4Press the up or down arrow button to scroll to Never, and then press .
5Press until you exit Setup, or press another mode button.
Changing the Power Saver timeout
The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left idle.
The Power Saver feature optimizes energy efficiency by reducing the printer power c onsumption (as much as 28 percent
on some printer models) compared to the default printer settings. To save the most energy, select the lowest Power
Saver timeout.
1From the printer control panel, press .
2Press the up or down arrow button to scroll to Device S etup, and then press .
3Press the up or down arrow button to scroll to Power Sa ver, and then press .
Using the printer control panel buttons and menus
17