Cannot scan to a computer over a network

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

MAKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE CONNECTED TO THE SAME NETWORK

MAKE SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER

MAKE SURE “ENABLE NETWORK SCAN TO COMPUTERIS SELECTED IN THE GENERAL TAB OF THE SCAN

CENTER (MACINTOSH ONLY)

Notes:
This is available only in Mac OS X version 10.6.
If you have several applications open, then make sure that the Scan Center is the active application. Otherwise,
the correct menu bar does not appear.
From the menu bar, navigate to:
Scan Center > Preferences > General tab
Memory card troubleshooting
“Memory card troubleshooting checklist” on page 10 7
“Nothing happens when a memory card is inserted” on page 10 7
“Cannot print documents from a memory card or flash drive” on page 108
“Photos do not transfer from a memory card across a wireless ne twork” on page 108

Memory card troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most me mory card problems:
Make sure that the memory card you are using can be used in the print er.
Make sure the memory card is not damaged.
Make sure memory card contains supported file types.

Nothing happens when a memory card is inserted

If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the following:
REINSERT THE MEMORY CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
CHECK THE USB CONNECTION
1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2Firmly plug the square end of the USB cable into the back of the print er.
Troubleshooting
107