Lexmark Z42 manual Installing printer, Software, Appendix

		Appendix
			4	Click Next or Finish on any
In this section, you can find
information about:				subsequent screens.
•	Installing printer software			The Lexmark Z42 software
•	Uninstalling printer software			installation screen appears.
•	Printing from DOS		5 Click Install Printer
•	Warranty			Software.
•	Notices		Windows 95/98/NT 4.0 -
•	Safety
			parallel cable

Installing printer		1	Start Windows.
		2 Click Cancel on any screens
software
			that appear.
You can obtain the printer
		3	When the desktop appears,
software using:
			insert the software CD.
• the compact disc (CD-ROM)
			The Lexmark Z42 software
	that came with your printer
			installation screen appears.
• the World Wide Web
		4	Click Install Printer
•	diskettes
			Software.
If your printer software does not
install properly, a		Windows 2000 - parallel or
communications error message		USB cable
appears when you try to print.		1	Start Windows.
You may need to uninstall, and		2	Click Cancel on any screens
then reinstall the printer
			that appear.
software. For help, see page 38.
Using the CD-ROM		3 When the desktop appears,
			insert the software CD.
Follow the set of instructions			The Lexmark Z42 software
that corresponds to your			installation screen appears.
operating system and printer		4	Click Install Printer
cable (parallel or USB):
			Software.
Windows 98 - USB cable
1	Start Windows.
2 Click Next when the first
	screen appears.

3 Insert the software CD.

Note: If the CD does not run automatically when you insert it:

1 From the Start menu,

select Run.
2 In the command-line text
box, type the letter of
your CD-ROM drive,	Appendix
followed by :\setup (for
example, d:\setup), and
then click OK.
Using the World Wide
Web

If your computer does not have a CD-ROM drive, you can download the printer software from the World Wide Web at www.lexmark.com.

1From Lexmark’s Web site, select the appropriate driver for your operating system.

2Select Save to Disk.

3Select a location on your hard disk drive.

4Double-click the executable (.exe) file to open it.

The Win Self-Extractor window opens.

5Follow the set of instructions on your screen.

Using diskettes

If your computer does not have a CD-ROM drive, you can create driver diskettes using a friend’s computer or a computer at your

•

•

Appendix ••37

•